Cleaning overhead glass includes cleaning glass inside and outside the building. While cleaning the inside glass is usually simple and can be cleaned every day, the outside glass requires much more care and professionalism.

This work can be done periodically weekly or monthly but must have a strict process. Normally, only companies that provide professional cleaning services can meet all labor safety requirements.

The article below will help you know what the standard process of cleaning overhead glass is like?

Step 1: Prepare tools, supporting machinery and equipment and specialized chemicals

• Place hazard warning signs around the cleaning area. Let passersby know and avoid construction areas.
• Prepare support equipment: elevator, safety belt, gondola suspension floor. Then, assemble and check for safety before implementation.
• Prepare the necessary tools for cleaning glasses: towels, buckets, glass scrubbing cotton, multi-purpose chemicals, glass cleaning chemicals, labor protection gear, etc. Make sure everything is fully equipped. enough and arranged reasonably so as not to fall to the ground during the glass cleaning process.
• Move furniture and cover water with silver.

Step 2: Rough cleaning

This is considered a stepping stone to more effective rear glass cleaning steps.

In this step, staff will use a knife to scrape off paint, glue, and cement stains on the frame and glass surface.

Step 3:  Clean the glass frame

Nhằm tiết kiệm công sức và tránh phải lau lại nhiều lần, người lao động nên làm sạch phần khung và các góc cạnh trên bề mặt kính trước. Vì chúng thường tập trung nhiều bụi bẩn và vi khuẩn.

Cách làm như sau:

• Mix cleaning chemicals for glass frames in appropriate proportions.
• Clean the glass frame with a dust brush, towel and mixed chemicals.

Step 4: Clean the glass surface

This is also the most important and involved step in the process of cleaning overhead glass

• First, wet the glass with cleaning solution.
• Dip a towel or glass cleaner into a bucket of chemicals mixed in proportion and then rub in a zigzag pattern from top to bottom until the end of the glass.
• Wipe glasses. Can be done in 1 of 4 ways: vertical wiping, horizontal wiping, square wiping or horizontal zigzag wiping from top to bottom.

Note:  keep the wiper blade at a 45 degree angle to the glass, always close to the glass to push out all the dirt.

• Wipe the blade with a dry cloth after each wipe.
• Then, use a dry cloth to wipe the edges around the glass.

Step 5: Check and clean up after cleaning

Staff will check again to ensure the glass surface is completely clean and up to standards.

Afterwards, clean up the ground area including: removing tarpaulins, removing warning signs and returning them to their original condition.

Contact Clean House immediately to receive safe and effective overhead glass cleaning services, via:

• Hotline: (028) 3957 4483 
• Mail: info@dichvunhasach.com.